Nikon Digimicro MF 1001 Digital Height Gauge - Manual Measuring Systems - Measuring

The MF-1001 is a compact digital micrometer offering flawless contact measurements of dimensions, thickness and depth. It features a measuring length equal to 100mm and accuracy of 1µm at 20° C. Stands are available in ceramic, steel or granite for added stability and a wide variety of probe tips are available to suit most applications.

Applications:

Surface analysis

Dust Bellows

Protects the digital micrometer head spindle section from dust and dirt, increasing the lifetime of the equipment.

TC-101 Counter

More compact and accurate than previous models

Smallest readable value is 0.01µm

Can be used with old-type digital micrometers and rotary encoders

Superior cost performance

RS-232C output and printer output are standard features

Highlights

Measuring length equal to 100mm

Accuracy of 1 µm at 20°C.

Readings as small as 0.1 µm or even 0.01 µm can be made depending on the counter.

RS-232 and printer output are standard features.

MFC-101 Counter

A compact, single shaft counter for exclusive use with the MF-501 and MF-1001 with display and resolution switching, direction switching, and display unit switching functions. Can be attached to the head or placed outside. RS-232C output and printer output are standard features.

MF-8P Printer

Connects to the MF-101 counter and the TC-101; not only prints but performs statistical calculations, judges pass or reject, and creates histograms, all with simple key operations, permitting highly efficient data processing.

Readout Travel	100mm (4 in)
Minimum Readout	0.1 Micron (switchable determined by the counter used)
Accuracy	Autocollimator Stand Type 3 - Heavy duty with unique precision 2-axis targeting adjustment knobs. Spiral column height adjustment as well as 360° tilt, swivel and rotation.
Measuring Angle	Useable in down or sideways position
Measuring Force - Variable	Down 125-185; Lateral 85 to 125 gf
Response Speed	500m/seconds or better
MFC-101 Compact Counter Tech Specs	Mounting: Can be mounted directly on the Digimicro; Inches/mm: Inch or Metric (switchable); Display: 7-segment LED display; Minimum readout: 0.1, 0.5, 1.0 ,ocrpm (0.000005”, 0.00002”, 0.00005”) setting by switch on back; Reset: Zero reset button on front; RS232: RS232 output (with optional cable); Power: 12V DC adapter - available in 120V or 240V models
TC-101 Table-top Counter Tech Specs	Inches/mm: Inch or Metric (switchable); Display: 10-segment LED display; Minimum readout: 0.01, 0.05, 0.1, 0.5, 1.0 micron (0.0000005”, 0.000002”, 0.000005”, 0.00002”, 0.00005”) dip switch on back; Functions: Zero reset button on front, preset, pulse check, zero blanking; RS232: RS232 output (with optional cable); Power: 12V DC adapter - available in 120V or 240V models; Optional: Extension cable 2M (6 ft) counter to Digimicro head